Whirlpool 3ED25DQ Instrukcja obsługi i konserwacji - Strona 20
Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Lodówka Whirlpool 3ED25DQ. Whirlpool 3ED25DQ 30 stron. No-frost refrigerator-freezers with thirst crusher
Również dla Whirlpool 3ED25DQ: Instrukcja obsługi i konserwacji (30 strony), Instrukcja obsługi i konserwacji (24 strony)
Drukuj stronęTo change light behind quick freeze
compartment
(on some models):
1. Disconnect refrigerator from power
supply.
2. Lift and secure quick freeze compartment
door.
3. Remove light shield by pulling top
forward.
4. Replace bulb with a 40-watt appliance
bulb.
5. Replace light shield.
6. Reconnect refrigerator to power supply.
To change dispenser
area light:
1. Disconnect refrigerator from power supply.
2. Reach through dispenser area to remove bulb.
3. Replace with a heavy-duty
lo-watt bulb,
which can be purchased from your
Whirlpool dealer.
4. Reconnect refrigerator to power supply.
NOTE: Not all appliance bulbs will fit your
refrigerator. Be sure to replace a bulb with
one of the same size and shape.
Light
below
' ice bin
Light behind
quick freeze
compartment
Dispenser area light
Removing
the base grille
To remove the grille:
1. Open both doors.
2. Pull base grille forward to release the
support tabs from the metal clips.
3. Do not remove Tech Sheet fastened
behind the grille.
To replace the grille:
1. Line up grille support tabs with metal
clips.
2. Push firmly to snap into place.
3.
Close the doors.
See cleaning instructions
for defrost pan and
condenser coils on page 22.
Condenser coils
I
Defrost
----
grille
L pan
support
tabs
19