Whirlpool 3ET16NKXDG00 Instrukcja obsługi i konserwacji - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Lodówka Whirlpool 3ET16NKXDG00. Whirlpool 3ET16NKXDG00 29 stron. No-frost refrigerator-freezer

Whirlpool 3ET16NKXDG00 Instrukcja obsługi i konserwacji
Changing
the control
settings
If you need to adjust temperatures in
l
Adjust the Refrigerator Control first.
refrigerator or freezer, use the settings listed
in the chart below as a guide.
l
Wail at least 24 hours between adjustments.
l
Then adjust the Freezer Control if needed.
CONDlTION:
Refrigerator
section
too warm
Freezer
section
too warm
Refrigerator
section
too cold
RECOMMENDED
REASON:
CONTROL SETTINGS:
Refrigerator
Freezer
l
Door opened often
l
Large amount of food added
4
2
l
Room temperature too warm
l
Door opened often
l
Large amount of food added
aVery cold room temperature
3
4
(can't cycle often enough)
l
Controls not set correctly
for your conditions
2
4
Ice not
l
Heavy be usage
made fast
l
Very cold raom temperature
enough
(can't cycle often enough)
4
4
Both
sections
too warm
l
Door opened often
l
Large amount of food added
every warm or very cold room
teqeratures
4
4
Removing
the drop-in
door trim
pieces
(on some
models)
To remove the trim place:
1. Remove all items from the shelf.
2. Pull straight up on the trim piece at each
end.
To replace the trim piece:
1. Locate each end of the trim piece above
the trim pocket opening.
2. Push the trim piece straight down until it
stops.
3. Replace items on the shelf.
9