Whirlpool 3ET16NKXDG00 Instrukcja obsługi i konserwacji - Strona 19

Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Lodówka Whirlpool 3ET16NKXDG00. Whirlpool 3ET16NKXDG00 29 stron. No-frost refrigerator-freezer

Whirlpool 3ET16NKXDG00 Instrukcja obsługi i konserwacji
Using
the optional
automatic
ice maker
If your refrigerator has an automatic ice
maker, or if you plan to add one later
(contact the dealer for ice maker kit num-
ber), here are a few things you should know.
l
The ON/OFF lever is a wire signal arm.
DOWN to make ice automatically
UP to shut off the ice maker
IMPORTANT: Do not turn ice maker on
until you connect it to the water suppfy.
l
If you remove the ice bin, raise the signal
arm to shut off the ice maker. When you
replace the bin, push it in all the way and
lower the ice maker signal arm to the ON
position.
UP
to atop
ke mnker.
DOWN
to start
ke maker.
l
Good water quality is important for good
ice quality. Try to avoid connecting the ice
maker to a softened water supply. Water
softener chemicals (such as salt from a
maffunctioning softener) can damage the
ice maker rnokl and lead to poor ice
qualii. lf you cannot avoid a softened
water supply, make sure the water soft-
ener is operating property and is well
maintained.
Solving
common
ice maker
problems
PROBLEM
POSSIBLE CAUSE/SOLUTlON
Ice crescents attached
l
This is normal. They break apart easily. Shake bin occasion-
at corners
ally to keep cubes separated.
Ice maker will not
l
ON/OFF lever is in the OFF (up) position. Lower lever to the
operate or Ice Is not
ON (down) position.
made fast enough
l
Freezer is not cold enough. Adjust temperature controls and
wait 24 hours. (See "Changing the control settings" on page 9.)
Off-taste or odor In ke
l
New plumbing connections can cause discolored or off-
flavored ice. Discard the first few batches of ice.
l
Cubes are stored too long. Throw them away and make a new
supply.
l
Food is not wrapped properly. See page 25.
l
Freezer and ice bin need to be cleaned. See page 22.
18