Whirlpool 3ET18ZK Instrukcja obsługi i konserwacji - Strona 11
Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Lodówka Whirlpool 3ET18ZK. Whirlpool 3ET18ZK 19 stron. No-frost refrigerator-freezers
Również dla Whirlpool 3ET18ZK: Instrukcja obsługi i konserwacji (21 strony)
Drukuj stronę
Changing
the light
bulbs
Electrical
Shock Hazard
Before removing a light bulb, either unplug
the refrigerator or disconnect the electricity
leading to the refrigerator at the main
power supply.
Failure to do so could result in electrical
shock or personal injury.
To change the refrigerator
light:
1. Disconnect refrigerator from power supply.
2. Reach behind the Control Panel to remove
bulb.
3. Replace with a 40-watt appliance bulb.
4. Reconnect refrigerator to power supply.
NOTE: Not all commercial
appliance bulbs will fit
your refrigerator. Be sure to replace a bulb with
one of the same size and shape.
Removing
the base grille
To remove the grille:
1. Open refrigerator door.
2. Pull base grille forward to release the support
tabs from the metal clips.
3. Do not remove Tech Sheet fastened behind
the grille.
To replace the grille:
1. Line up grille support tabs with metal clips.
2. Push firmly to snap into place.
3. Close refrigerator door.
See cleaning instructions for defrost pan and
condenser coils on page 14.
11