Whirlpool 3VED23DQ Instrukcja obsługi i konserwacji - Strona 13
Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Lodówka Whirlpool 3VED23DQ. Whirlpool 3VED23DQ 25 stron. No-frost refrigerator-freezers with thirst crusher
Również dla Whirlpool 3VED23DQ: Instrukcja obsługi i konserwacji (30 strony)
Drukuj stronę
The water
dispenser
Chilled water comes from a tank behind the
meat drawer. It holds approximately
1.5 L
(1% quarts).
When the refrigerator is first hooked up,
press the water dispenser bar with a glass or
jar until you have drawn and discarded 1.9 to
2.8 L (2 to 3 quarts). The water you draw and
discard will rinse the tank and pipes. Allow
several hours to chill a new tankful.
NOTE: The small tray beneath the dispenser
is designed to evaporate small spills. There is
no drain in this tray. Do not pour water into it.
To dispense
water:
1.
Press a sturdy glass against the water
dispenser bar.
2. Remove the glass to stop dispensing.
NOTE: Dispense enough water every week to
maintain a fresh supply.
The dispenser
light
To turn on night light, slide dispenser LIGHT
switch to the left. See page 16 for directions
for changing the dispenser light bulb.
WATER
LIGHT
m
Using
the automatic
ice maker
Here are a few things you will want to know
about your automatic ice maker:
l
The ON/OFF lever is a wire signal arm.
Down . . . to make ice automatically.
up . . . to shut off the ice maker.
NOTE: Do not turn ice maker on until it is
connected to the water SUDDIV. Instruc-
tions for ice maker water sur>plv hook
up are attached
to the back of the
refriaerator
cabinet.
l
It is normal for ice crescents to be attached
by a corner. They will break apart easily.
l
The ice maker will not operate until the
freezer is cold enough to make ice. This
can take overnight.
l
If ice is not being made fast enough and
more ice is needed, turn the Refrigerator
Control toward a higher number. Wait a
day and, if necessary, turn the Freezer
Control toward C.
Raise signal
arm to stop
ice maker.
Lower signal
arm to start
ice maker.
l
Good water quality is important for good
ice quality. It is not recommended
that the
ice maker be connected to a softened
water supply. Water softener chemicals,
such as salt from a malfunctioning
soft-
ener, can damage the ice maker mold and
lead to poor ice quality. If a softened water
supply cannot be avoided, it is important
that the water softener be well maintained
and operating properly.
13