Whirlpool 3VED23DQDW00 Instrukcja obsługi i konserwacji - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Lodówka Whirlpool 3VED23DQDW00. Whirlpool 3VED23DQDW00 33 stron. No-frost refrigerator-freezer

Drukuj stronę

Before

Using Your

Refrigerator

It is important to prepare your refrigerator for use. This section tells you how to clean

it, connect it to a power source, install it, and level it.

Cleaning

your

refrigerator

Removing

packaging

materials

Remove tape and any inside labels

NOTE: Do not remove any permanent

(except the model and serial number

instruction labels inside your refrigera-

label) before using the refrigerator.

tor. Do not remove the Tech Sheet

To remove any remaining

glue:

fastened under the refrigerator at the

front.

Rub briskly with thumb to make a ball,

then remove.

Cleaning

it before

use

After removing all packaging materials,

Soak area with liquid hand dish-

clean your refrigerator be-

washing detergent before removing

fore using it, if necessary.

glue as described above. Do not use

See cleaning instructions

sharp instruments,

rubbing alcohol,

on pages 22-23.

flammable fluids, or abrasive cleaners.

These can damage the material.

See "Important Safety Instructions"

page 3.

Plugging

it in

Recommended

Grounding

Method

A 115 Volt/GO Hz (Plug l), 220/240 Volt/

50 Hz (Plug 2 or 3) or 220 Volt/GO Hz

(Plug 3) AC only 15 or 20 ampere fused

and properly grounded electrical supply

is required. It is recommended

that a

separate circuit serving only this appli-

ance be provided. Use a receptacle

which cannot be turned off with a switch

or pull chain. Do not use an extension

cord.

80 9'0 w \u 0 0

Plug 1

Plug 2

Plug 3