Ariston ASL75CXSNA Instrukcja naprawy - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja naprawy dla Suszarka Ariston ASL75CXSNA. Ariston ASL75CXSNA 18 stron. Condensation dryer
Również dla Ariston ASL75CXSNA: Arkusz danych (1 strony)

Drukuj stronę
Ariston ASL75CXSNA Instrukcja naprawy

8. HEATER ASSEMBLY

REPAIR MANUAL
TECH NOTE 1
Fig. 8-1
Fig. 8-2
• To access the Heater Assembly and Rear Thermostats,
remove the nine Heater Housing Phillips Screws (Fig. 8-1).
• The Heater Housing will come clear of the Rear Panel, but
it will still be attached to the wire harness (Fig. 8-2).
• The Heating Element Assembly is attached to the Heater
Housing with two Phillips screws. To remove the Heating
Element from the Heater Housing remove these two
screws (Fig. 8-3). See TECH NOTE on Fig. 8-1 for Heating
Element screw locations.
• The Heating Element Assembly contains both an upper
and lower element with a total output of 2500w along with
two Thermostats, see Section 9, Page 7 for Thermostat
details.
• To access the wire harness disconnect for the Heater
Assembly, it will be necessary to remove the Right Side
Panel (See Section 10, Page 10).
TECH NOTE 1: The two Heating Element Assembly screws
DO NOT have to be removed when removing the Heater
Housing.
ASL75CXS NA
Fig. 8-3
Page: 6