Cal Spas Cal Salt Spa Sanitation System Instrukcja obsługi - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akcesoria Cal Spas Cal Salt Spa Sanitation System. Cal Spas Cal Salt Spa Sanitation System 16 stron.
Drukuj stronę1. Introduction
1. Introduction
Your new Spa Sanitation System produces a pure form of chlorine by electrolysis of salt
(NaCl) in order to sanitize your spa water. After the salt is converted to chlorine and the
bacteria are killed, the chlorine converts back to salt in a continuous process. The salt
concentration used is very low (less than that in a human tear). Chlorine output can
be easily adjusted by the timer on the control panel. The chlorine level in your spa can
be checked by using a standard chlorine test kit. One unit can treat up to 2,200L (600
gallons) of spa water (or up to 5700L - 1500 gallons - for Swim Spa water).
IMPORTANT SAFETY INSTRUCTIONS
WARNING: RISK OF ELECTRIC SHOCK.
Connect only to a grounding type receptacle
protected by a ground-fault-circuit-interrupter (GFCI).
Contact a qualified electrician if you cannot verify
that the receptacle is protected by a GFCI.
WARNING:
shock do not use extension cords to connect unit
to electric supply; if necessary, contact a qualified
electrician to provide a properly located outlet.
WARNING:
control panel is set to zero when cleaning/servicing
the cell assembly.
This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge. Unless given proper supervision or
instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they
do not play with the appliance. If the supply cord is
damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified persons in
order to avoid a hazard.
INTRODUCTION
To reduce the risk of electric
Make sure the setting on the
SAVE THESE INSTRUCTIONS.
SPECIFICATIONS:
Power Supply:
Size: For Spas or Swim Spas up to 5700L
(1500 gallons)
INPUT:
120VAC, 50/60HZ, 0.33AMP
OUTPUT:
5.0 VDC, 2.0 Amp (40°C / 104°F)
Cell:
Normal output equivalent to 32 grams
(1.1 oz) of free available chlorine per day.
Reverse Polarity Function:
The reverse Polarity Function is
designed to automatically clean the cell
plates, maximizing the cell's ability to
manufacture chlorine.
3