Cal Test CT3681 Podręcznik użytkownika - Strona 3

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Sprzęt testowy Cal Test CT3681. Cal Test CT3681 17 stron.

being tested when a fault condition in the circuit exists. Capacitors

inside the instrument may retain a charge even if the instrument is

disconnected from its source of supply.

Use Only in Office-Type Indoor Setting

The probe is designed to be used in office-type indoor environments.

Do not operate the probe:

In the presence of noxious, corrosive, or flammable fumes,

gases, vapors, chemicals, or finely-divided particulates.

In environments where there is a danger of any liquid being

spilled on the probe.

In air temperatures exceeding the specified operating

temperatures.

In atmospheric pressures outside the specified altitude limits

or where the surrounding gas is not air.

Not for Critical Applications

This probe is not authorized for use in contact with the human body or

for use as a component in a life-support device or system.

Do Not Substitute Parts

Do not install substitute parts or perform any unauthorized modification

to the instrument.

Only Qualified Personnel

Only qualified personnel should use this probe. This differential

voltage probe is designed to be used by personnel who are trained,

experienced, or otherwise qualified to recognize hazardous situations

and who are trained in the safety precautions necessary to avoid

possible injury when using such a device.

Observe Maximum Working Voltage

Do not use the CT3681 or CT3683 probe above 5000 Vrms CAT I

(1000x attenuation) or 500 Vrms CAT I (100x attenuation) between the

two input leads. Do not use the probes above 5000 Vrms CAT I (both

100x and 1000x attenuation settings) between each input lead and

earth.

800-572-1028

caltestelectronics.com