Whirlpool WGD94HEXW Instrukcja obsługi i konserwacji - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Suszarka Whirlpool WGD94HEXW. Whirlpool WGD94HEXW 40 stron. Electronic dryer
Również dla Whirlpool WGD94HEXW: Instrukcja obsługi (8 strony)
![Whirlpool WGD94HEXW Instrukcja obsługi i konserwacji](/uploads/products/server2/6833933/6833933.jpg)
5
LED DISPLAY AND SETTINGS BUTTONS
When you select a cycle, its default settings will light
up and the Estimated Time Remaining (for Auto Cycles)
or actual time remaining (for Manual Cycles) will be
displayed.
Use the buttons along the bottom of the display to adjust
settings. See Cycle Guide for available settings on each
cycle. Not all settings are available with all cycles.
Cycle Status Lights
The indicator bar at the top of the display will let you
know what stage the drying cycle is in process.
For more information on each stage, see "Cycle Status
Indicators".
Temperature
When using Manual Cycles or Enhanced Touch Up, you
may select a dry temperature based on the type of load
you are drying. Use the warmest setting safe for the
garments in the load. Follow garment label instructions.
NOTE: Eco Auto Cycles use a preset temperature that
is not adjustable.
Dryness Level
You may adjust the Dryness Level on Eco Auto Cycles,
if desired.
NOTE: Dryness Level is for use with Eco Auto
Cycles only.
Garment # (on some models)
Use this button with the Quick Refresh cycle to select
the number of garments being refreshed. When START
is pressed, the cycle time will be displayed. See Cycle
Guide for more information.
Cycle Signal
Use this button to turn the buzzer indicating the
end of a drying cycle on or off, or to adjust the
volume of the buzzer.
NOTE: You may also turn off the tones that sound
when a button is pressed. Press and hold the
EcoBoost button for about one second to turn
button sounds on or off.
6
OPTION BUTTONS
Use these buttons to select available options for your
dryer. Not all cycles and options are available on all
models.
EcoBoost
Press to activate the EcoBoost option. The EcoBoost
option allows you to increase your energy savings by
using a slightly lower heat level. This may increase dry
times somewhat.
NOTE: Press and hold the EcoBoost button for about
one second to turn button sounds on or off.
Damp Dry Signal
Press to hear the Damp Dry Signal when the load is
damp, but not completely dry. This will allow you to
take clothes out of the load that do not need to dry
completely. This option is available on Heavy Duty,
Normal, Jeans, Bulky Items, Casual, and Delicate
cycles.
Drum Light
Press to turn the LED drum light on or off. The light
will also turn on when the door is open, and turn off
automatically after about 5 minutes.
Control Lock
Use this button to lock the controls of the dryer
and avoid an accidental change in cycle options or
preferences during a drying cycle.
7
WRINKLE SHIELD/WRINKLE SHIELD with Steam
(on some models)
If you will be unable to remove a load immediately,
press Wrinkle Shield to add up to 120 minutes of periodic
tumbling to help reduce wrinkling. On models with Wrinkle
Shield with Steam, a short steam cycle is added after 60
minutes to help smooth out wrinkles.
NOTE: On models with Wrinkle Shield with Steam. you
may turn off Steam by pressing and holding the Wrinkle
Shield button until - St appears in the display. The dryer
will remember this setting for future loads. To turn Steam
back on, press and hold the Wrinkle Shield button again
for several seconds.
STATIC REDUCE (on some models)
8
Press to add the Static Reduce option to select Auto
cycles. The dryer will automatically tumble, pause, and
introduce a small amount of moisture into the load to help
reduce static. This option adds approximately 8 minutes
to the total cycle time.
7