Whirlpool 29" Instrukcja instalacji - Strona 19

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Suszarka Whirlpool 29". Whirlpool 29" 22 stron. Dryer
Również dla Whirlpool 29": Instrukcja instalacji (48 strony)

Drukuj stronę

Remove screws from door

Remove screws at top, bottom, and side of door

(5 screws). Keep door screws separate from hinge screws

as they are different sizes. Holding door over towel on

dryer, grasp sides of outer door and lift to separate it

from inner door.

NOTE: Do not pry apart with putty knife or screwdriver.

Do not pull on door seal or plastic door catches.

Rotate outer door

Take outer door and rotate it 180º and set it back down on

inner door. Be certain to keep cardboard spacer centered

between doors. Reattach outer door panel to inner door

panel so handle is on the side where hinges were just

removed. Insert 5 door screws.

Flip door over

Flip door over so handle side is down.

Attach door hinges

Reattach door hinges to dryer door so that the larger hole is

at the bottom of the hinge.

Remove and transfer plugs

Remove the 4 screws that attach 2 plugs on the left side.

Transfer plugs to opposite side using the same 4 screws.