Whirlpool 3LWED4830FW Instrukcja instalacji - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Suszarka Whirlpool 3LWED4830FW. Whirlpool 3LWED4830FW 19 stron. 737 mm (29 inch) wide models – gas & electric

Whirlpool 3LWED4830FW Instrukcja instalacji

Tools and Parts

Gather the required tools and parts before starting installation.
Tools needed for all installations:
Flat-blade screwdriver
6 mm (1/4") nut driver
or socket wrench
(recommended)
Tape measure
Level
Adjustable wrench that
opens to 25 mm (1") or
hex-head socket wrench
Utility knife

INSTALLATION REQUIREMENTS

#2 Phillips screwdriver
Tin snips (new vent
installations)
Vent clamps
Pliers
Caulking gun and
compound (for installing
new exhaust vent)
Putty knife
Tools needed for gas installations:
203 mm or 254 mm
(8" or 10") pipe wrench
Pipe-joint compound
resistant to LP gas
Parts supplied:
Leveling legs (4)
Parts package is located in dryer drum. Check that all parts
are included.
Parts needed:
Check local codes. Check existing electrical supply and venting.
See "Electrical Requirements" and "Venting Requirements"
before purchasing parts.
Check code requirements. Some codes limit, or do not permit,
installing dryer in garages, closets, mobile homes, or sleeping
quarters. Contact your local building inspector.
Optional Equipment:
(Not supplied with dryer)
Refer to your Use and Care Guide for information about
accessories available for your dryer.
203 mm or 254 mm
(8" or 10") adjustable wrench
(for gas connections)
Plugs and cord lock cover
(supplied with some
models only)
5