Whirlpool 3XLGR5437 Instrukcja obsługi i konserwacji - Strona 12
Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Suszarka Whirlpool 3XLGR5437. Whirlpool 3XLGR5437 32 stron. Electric and gas dryer
Również dla Whirlpool 3XLGR5437: Instrukcja obsługi i konserwacji (36 strony), Instrukcja obsługi i konserwacji (36 strony)
Loads are wrinkled
Was the load removed from the dryer at end of the cycle?
Remove load as soon as tumbling stops.
Was the dryer overloaded?
Dry smaller loads that can tumble freely.
Did the load overdry?
Check the manufacturer's care label. Match dryer setting to
load type. See "Drying, Cycle, and Temperature Tips."
Odors
Have you recently been painting, staining or varnishing in
the area where your dryer is located?
If so, ventilate the area. When the odors or fumes are gone
from the area, re-wash and dry the clothing.
If the dryer is electric, is it being used for the first time?
The new electric heating element may have an odor. The odor
will be gone after the first cycle.
If the dryer is gas, there may be a gas leak.
Turn off the gas supply line, leave your house, and then call
your local gas company.
Garment damage
Check the following:
Were zippers, snaps, and hooks left open?
Were strings and sashes tied to prevent tangling?
Were care label instructions followed?
Were items damaged before drying?
If you still have problems, see the Assistance or Service
section.
12
ASSISTANCE OR SERVICE
Before calling for assistance or service, please check the
Troubleshooting section. It may save you the cost of a service
call. If you still need help, follow these instructions.
If you need assistance or service
If your problem is not due to any of the items listed in the
Troubleshooting section, contact the dealer from whom you
purchased the dryer, or a designated Whirlpool service company.
When calling, please know the purchase date, and the complete
model and serial number of your appliance. This information will
help us better respond to your request.
If you need replacement parts
FSP
is a protected trademark of Whirlpool Corporation for
®
quality parts. Look for this symbol of quality whenever you need a
replacement part. FSP replacement parts will fit right and work
right because they are made to the same exacting specifications
used to build every new WHIRLPOOL
To locate FSP replacement parts in your area, contact the dealer
from whom you purchased the dryer, or a designated Whirlpool
service company.
appliance.
®