Whirlpool 7MWGD1900EW Instrukcja obsługi i konserwacji - Strona 15

Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Suszarka Whirlpool 7MWGD1900EW. Whirlpool 7MWGD1900EW 24 stron. Electric or gas

Whirlpool 7MWGD1900EW Instrukcja obsługi i konserwacji

Technical Specifications

Whirlpool Washers
Technical Specifications
Models
Power
Frequency
Current
Maximum Capacity (humid clothes)
Height
Width
Depth
Check Your Vent System
For Good Air Flow
Good air flow
Along with heat, dryers require good air flow to efficiently
dry laundry. Proper venting will reduce your drying times
and improve your energy savings. See "Installation
Instructions."
The venting system attached to the dryer plays a big role in
good air flow.
Service calls caused by improper venting are not covered
by the warranty and will be paid by the customer, regardless
of who installed the dryer.
Use Automatic Dry Cycles For Better
Fabric Care And Energy Savings
Use the Automatic Dry cycles to provide the most energy savings and enhanced fabric care from the dryer.
During Automatic Dry cycles, drying air temperature or moisture level are sensed in the load. This sensing occurs throughout the
drying cycle and the dryer shuts off when the load reaches the selected dryness.
With Timed Dry, the dryer runs the amount of time set and sometimes results in shrinkage, wrinkling, and static due to over-drying.
Use Timed Dry for the occasional damp load that needs a little more drying time or when using the drying rack.
7MWED1800EM 7MWED1900EW
220 - 240 V 2N˜
220 - 240 V 2N˜
60 Hz
60 Hz
26 A
26 A
18 kg
19 kg
110 cm
110 cm
74 cm
74 cm
72 cm
72 cm
7MWGD1800EM
7MWGD1900EW
7MWGD1860EM
110 - 127 V~
60 Hz
6 A
18 kg
110 cm
74 cm
72 cm
Maintain good air flow by:
Cleaning your lint screen before each load.
n
Replace plastic or foil vent material with 4" (102 mm)
n
diameter heavy, rigid vent material.
Use the shortest length of vent possible.
n
Use no more than four 90° elbows in a vent system;
n
each bend and curve reduces air flow.
Good
Better
Remove lint and debris from the exhaust hood.
n
Remove lint from the entire length of the vent system
n
at least every 2 years. When cleaning is complete, be
sure to follow the "Installation Instructions" supplied
with your dryer for final product check.
Clear away items from the front the dryer.
n
110 - 127 V~
60 Hz
6 A
19 kg
110 cm
74 cm
72 cm
15