AEQ AM-03 Podręcznik użytkownika - Strona 12
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Wzmacniacz AEQ AM-03. AEQ AM-03 13 stron. Self-powered stereo audio monitor
Również dla AEQ AM-03: Podręcznik użytkownika (13 strony)
Drukuj stronę6.
TECHNICAL SPECIFICATIONS
6.1.
Technical specifications of AM-03
Inputs:
Outputs:
Controls:
Metering:
Acoustic
System:
Power
Requirements : 90 ~ 250 V AC, 50 - 60 Hz, 50 VA.
Dimensions:
Peso:
Note: The technical specifications contained in this page are merely orientative. They are subject to change without previous
advice.
6 stereo inputs, selectable from the front panel, electronically
balanced with RF filter.
Impedance: > 100 KOhm.
Nominal level: 0 dBv.
Connectors: Male connector, 3 pole - pitch 5.08mm.
1 stereo parallel audio output to the selected input, with male
connector, 3 pole - pitch 5.08mm
600 Ohm, stereo headphones connector female ¼" connector with
automatic speaker disconnection.
Input selector.
Balance control.
Gain control.
Phase meter Left/Right by 25 led matrix in a 5 x 5 configuration.
Three way acoustic system:
Low:
Monoaural. 1 compression magnet-dynamic speaker.
Mid:
Stereo. 2 compression magnet-dynamic speaker.
High:
Stereo. 2 piezo-electric speakers.
Limiter:
Incorporated to protect speakers, adjusted to the optimal
output power.
Cross-over frequencies:
Low - Mid: 600 Hz.
Mid - High: 4 KHz.
Frequency response:
65 Hz to 19 KHz.
Harmonic distortion : < 0.1 %.
Width: 483 mm (19").
Height: 44 mm (1 Unit rack).
Depth: 365 mm (14.4").
6.2 Kilograms.
AEQ AM‐03
Self‐powered Stereo Audio Monitor