Whirlpool AWZ 8000 Skrócona instrukcja obsługi - Strona 4
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Suszarka Whirlpool AWZ 8000. Whirlpool AWZ 8000 5 stron.
Drukuj stronę
Before using the machine, please also read the instructions for use carefully!
AWZ 8000/PRO
Programme selector knob
The drying programme is selected by
turning this knob.
"Start (Pause)" button
The drying programme is started by
pressing this button. The indicator lamp
flashes during the selection phase and
lights up during drying.
Indicator lamps
Filter
The indicator lamp lights up when the
filter needs cleaning.
Clean the filter at the end of every
cycle.
Overdry protection
The indicator lamp lights up when a
humidity controlled program is selected,
to indicate the working protection
function. Function is not active in time
controlled programmes 20', 30', 40',
60', 90' and "Airing" "
Whirlpool is a registered trademark of Whirlpool USA
Quick Reference Guide
Programme sequence
".
Overdry
Drying
protection
Options
Gentle
Reduces drying intensity
(recommended for delicate items).
Buzzer
Signals/sounds end of drying cycle.
Delayed Start
Delays the start of the drying cycle by
3 to 9 hours. Each time the button is
pressed, the start time is delayed by 3
hours.
Then press the "Start (Pause)"
button to confirm the final selection
and to start the dryer. The delayed
start indicator lamp flashes and the
countdown counts down in 1-hour
intervals. The countdown is indicated
by the indicator lamp. During the
countdown, the drum will turn from
time to time to re-distribute the
laundry. To cancel or change the
previously set time delay, set the
programme selector knob to "Off"
"
" or open the door.
(Subject to technical modifications)
GB
Anti-
End
crease
of cycle
5019 307 01424
4