Whirlpool Cabrio,- WED7300X Instrukcja obsługi i konserwacji - Strona 4

Drukuj stronę

Whirlpool Cabrio,- WED7300X Instrukcja obsługi i konserwacji

What's New Under the Lid?

Cleaning

with

Less Water

Traditional

agitator-style

washer

Low-water

washer

The most striking difference in your new washer is the low-water

washplate wash system. The washer automatically

adjusts the

water level to the load size--no

water level selector is needed.

For best performance,

it is recommended

to load items in loose

heaps evenly around the washplate.

Automatic

Load Size Sensing

Once you start the cycle, the lid will lock, and the washer will

begin the sensing process to determine the correct water level

for the load.

Initially the basket will start to spin prior to adding water, this is

part of the sensing process and is normal. This low-water wash

method uses less water and energy compared to a traditional

agitator-style

washer.

Choosing

the Right

Detergent

Use only High Efficiency detergents. The package will be

marked "HE" or "High Efficiency."

Low-water washing creates

excessive sudsing with a regular non-HE detergent. Using

regular detergent will likely result in longer cycle times and

reduced rinsing performance.

It may also result in component

failures and noticeable mold or mildew. HE detergents are made

to produce the right amount of suds for the best performance.

Follow the manufacturer's

instructions

to determine the amount

of detergent to use and do not go over the Max line. See "Using

Laundry Product Dispensers" for more information.

Use only High Efficiency (HE) detergent.

As the washer dampens and moves the load, the level of the

items will settle in the basket. This is normal, and does not

indicate that more items should be added.

IMPORTANT:

You will not see a washer basket full of water

as with your past agitator-style

washer. It is normal for some

of the load to be above the water line.

Improved

Cleaning

Low-water cleaning means concentrated

cleaning. Rather

than diluting detergent as done in an agitator-style

washer,

this washer delivers the detergent directly to the soils. This low

water wash also allows the clothing to move in a more effective

way to remove soils.

Normal

Sounds

You Can Expect

At different stages of the wash cycle, you may hear sounds

and noises that are different from those of your previous

washer. For example, you may hear a clicking and hum at the

beginning of the cycle, as the lid lock goes through a self-test.

There will be different kinds of humming and whirring sounds

as the washplate moves the load and as basket is slowing

down to stop. And sometimes, you may hear nothing at atl, as

the washer determines the correct water level for your load or

allows time for clothes to soak.