Whirlpool CEM2795FQ0 Instrukcja instalacji - Strona 20

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Suszarka Whirlpool CEM2795FQ0. Whirlpool CEM2795FQ0 29 stron. Commercial gas or electric

ELECTRIC DRYER ELECTRICAL CONNECTIONS

Connecting 3-Wire Connection: Power Supply Cord (cont.)

3. Connect remaining wires under outer terminal block screws

(F). Tighten screws. Finally, reinstall terminal block cover to

dryer rear panel. Secure cover with hold-down screw. Now

go to "Venting Requirements."

Direct Wire Connection

Remove Terminal Block Cover

Remove hold-down screw and terminal block cover.

Direct Wire Strain Relief

1. Insert strain relief.

Unscrew the removable conduit connector (A) and any

screws from a ¾" (19 mm) UL listed strain relief (UL marking

on strain relief). Put the threaded section of the strain relief

Reaching inside the terminal block opening, screw the

removable conduit connector (A) onto the strain relief threads.

2. Insert conduit into strain relief and tighten clamp.

Put direct wire cable through the strain relief. The strain

relief should have a tight fit with the dryer cabinet and be in

a horizontal position. Tighten strain relief screw against the

direct wire cable.

(FOR U.S.A. ONLY)