Whirlpool Drying Cabinet Instrukcja obsługi i konserwacji - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Suszarka Whirlpool Drying Cabinet. Whirlpool Drying Cabinet 16 stron. Whirlpool drying cabinet use & care guide
Drukuj stronęWARNING:
To reduce the risk of fire, electric shock, or injury to persons when using the drying cabinet, follow
basic precautions, including the following:
Read all instructions before using the drying cabinet.
Do not place items exposed to cooking oils in your
drying cabinet. Items contaminated with cooking
oils may contribute to a chemical reaction that
could cause a load to catch fire.
Do not dry articles that have been previously
cleaned in, washed in, soaked in, or spotted with
gasoline, dry-cleaning solvents, other flammable,
or explosive substances as they give off vapors
that could ignite or explode.
Do not allow children to play on or in the drying
cabinet. Close supervision of children is necessary
when the drying cabinet is used near children.
Before the drying cabinet is removed from service or
discarded, remove the door to the drying compart-
ment.
Tip Over Hazard
Drying cabinet is top heavy and tips easily when
not completely installed.
Use two or more people to move and install
drying cabinet.
Failure to do so can result in serious injury
or cuts.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
Do not install or store the drying cabinet where it
will be exposed to the weather.
Do not repair or replace any part of the drying cabinet
or attempt any servicing unless specifically recom-
mended in this Use and Care Guide or in published
user-repair instructions that you understand and have
the skills to carry out.
Do not use heat to dry articles containing foam rubber
or similarly textured rubber-like materials.
Keep area around the exhaust opening and adjacent
surrounding areas free from the accumulation of lint,
dust, and dirt.
The interior of the drying cabinet and exhaust vent
should be cleaned periodically by qualified service
personnel.
Do not tamper with controls.
See installation instructions for grounding require-
ments.
3