Whirlpool Duet GGW9200LL1 Instrukcja obsługi i konserwacji - Strona 17
Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Suszarka Whirlpool Duet GGW9200LL1. Whirlpool Duet GGW9200LL1 48 stron. Electronic gas dryer
Drukuj stronęCycle tips
•
Dry most loads using the preset cycle settings.
•
Refer to the Automatic
or Manual Preset Cycle Settings chart
(in the "Cycles" section) for a guide to drying various loads.
Drying temperature and Dryness Level are preset when
you choose an Automatic
Cycle. You can choose a
different dryness level, depending on your load by
pressing the DRYNESS LEVEL button to select MORE or
LESS.
If you wish to adjust the cycle length of a Manual Cycle,
you must press MORE TIME or LESS TIME. Adjust the
temperature
of a Manual Cycle by pressing
TEMPERATURE until the desired temperature is selected.
NOTE: You cannot choose a Dryness Level with Manual
Cycles.
WRINKLE
SHIELD
TM
Feature
The WRINKLE SHIELD
TM
feature light glows when this option is
selected. This indicator stays on with the Cycle Complete light.
Control Locked
The CONTROL LOCKED light glows when this option is enabled,
Indicator lights
Other indicator lights on the control panel show Cycle, Temper-
ature, and End of Cycle settings selected.
The time display will indicate the estimated or actual time
remaining in a cycle.
Select the drying cycle that matches the type of load you are
drying (see Automatic
Preset or Manual Preset Cycle Settings
charts).
You may follow the progress of your dryer with the drying Status
HeavyDutyF_--_
indicator lights.
Stotu$
0 Sensing
Casual,
0 Wet
Delicate,
0
Damp
0 CoolDown
0 _le
Complete
0
WrinkleShield
0 ControlLocked
Sensing
When the dryer is first turned on, the SENSING light glows until a
wet item is detected.
•
In an Automatic
Cycle, if a wet item has not been detected
within 10 minutes, the Sensing light will turn off and the dryer
will shut down.
•
In a Manual Cycle, if a wet item is not detected after 10
minutes the Wet light turns on and the selected cycle
continues.
Wet
The WET light will turn on when a wet item has been detected in
the dryer. The Wet light will remain on until:
•
The damp dry point is reached in an Automatic
Cycle.
•
The dryer enters the cool down period in a Manual Cycle.
Damp
The DAMP light indicates that the load has reached the damp dry
level.
NOTE: The Damp light is not used with manual cycles.
Cool Down
The COOL DOWN light glows during the cool down part of the
cycle. Laundry is cooling down for ease in handling.
Cycle Complete
This light glows when a drying cycle is finished. If the WRINKLE
SHIELD
TM
feature has been selected, the WRINKLE SHIELD
TM
feature indicator light will also be on.
The Cycle Complete light turns off one hour after the end of a
drying cycle (including the WRINKLE SHIELD
TM
cycle of 2 hours),
when Pause/Cancel is pressed, or when the door is opened.
"ouch Up
Autamatic Cycles
Manual O ]des
Cycle control knob
Automatic
Cycles allow you to match the cycle to the load you
are drying. See the following "Automatic
Preset Cycle Settings"
chart. Each cycle dries certain fabrics at the recommended
temperature.
A sensor detects the moisture in the load and
automatically
adjusts the drying time for optimal drying.
Heavy Duty
Use this cycle to get High heat for heavy fabrics such as cotton
towels or bedspreads.
Normal
Use this cycle to get Medium heat for drying sturdy fabrics such
as work clothes.
Casual
Use this cycle to get Medium heat for drying no-iron fabrics, such
as sport shirts, casual business clothes and permanent press
blends.
Delicate
Use this cycle to get Low heat for drying synthetic fabrics,
washable knit fabrics and no-iron finishes.
Super Delicate
Use this cycle to get Extra Low heat to gently dry items such as
lingerie, exercise wear, or sheer curtains.
17