Whirlpool WGD8300SE Instrukcje użytkownika - Strona 4
Przeglądaj online lub pobierz pdf Instrukcje użytkownika dla Suszarka Whirlpool WGD8300SE. Whirlpool WGD8300SE 8 stron. Dimensions
Również dla Whirlpool WGD8300SE: Instrukcja obsługi i konserwacji (28 strony), Wymiary (1 strony)
Drukuj stronę
WARNING
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from dryer.
Do not dry anything that has ever had anything
flammable on it (even after washing).
Failure to follow these instructions can result in death,
explosion, or fire.
WARNING: To reduce the risk of fire, electric shock, or injury to
persons, read the IMPORTANT SAFETY INSTRUCTIONS before
operating this appliance.
This book covers several different models. Your dryer may not
have all of the cycles and features described.
Before using your dryer, wipe the dryer drum with a damp cloth to
remove dust from storing and shipping.
1. Clean lint screen before each load. See "Cleaning the Lint
Screen."
2. Load clothes loosely into the dryer and close the door. Do not
pack the dryer. Allow space for clothes to tumble freely.
3. Turn the Cycle Control knob to the recommended cycle for the
type of load being dried. Use the Energy Preferred setting (*)
to dry most heavy to medium-weight fabrics.
4. If your dryer has a Temperature selector, set it to the
recommended setting for the type of fabric being dried. See
"Dryer Cycle Descriptions" (separate sheet) for temperature
suggestions. On some models, temperature is included in the
cycle selections.
5. (OPTIONAL) Your dryer may have a WRINKLE SHIELD™
feature selector. When you are unable to remove a load from
the dryer as soon as it stops, wrinkles can form. This feature
periodically tumbles, rearranges and fluffs the load without
heat to help smooth out wrinkles.
6. (OPTIONAL) Your dryer may have an END OF CYCLE SIGNAL.
The signal is helpful when drying items that should be
removed from the dryer as soon as it stops.
On some models, the volume of the End of Cycle signal
can be adjusted. Turn the selector to the desired volume.
On other models, the End of Cycle signal is part of the
Start button and is selectable. Turn the START button to
ON or OFF. The signal will sound only if the selector is set
to On.
7. Select the desired Option. See "Dryer Cycle Descriptions"
(separate sheet).
8. If desired, add fabric softener sheet. Follow instructions on the
package.
9. Push the START button.
4
DRYER USE
Starting Your Dryer
No washer can completely remove oil.
Do not dry anything that has ever had any type of oil on
it (including cooking oils).
Items containing foam, rubber, or plastic must be dried
on a clothesline or by using an Air Cycle.
Failure to follow these instructions can result in death
or fire.
How Automatic Drying Works
When you are using the Auto Moisture Sensing Cycle, the dryness
of the load is determined by two metal strips (sensors) located on
the inside of the dryer. The metal strips help "feel" the amount of
moisture left in the clothes as they pass. When moisture is left in
the clothes, the Cycle Control knob will not advance. As clothes
begin to dry, the amount of water left in the clothes decreases,
and the timer advances through the remainder of the cycle. When
the selected dryness level is reached, the dryer goes into a cool
down period of up to 10 minutes.
Stopping and Restarting
You can stop your dryer anytime during a cycle.
To stop your dryer
Open the dryer door or turn the Cycle Control knob to OFF.
NOTE: The Cycle Control knob should point to an Off area when
the dryer is not in use.
To restart your dryer
1. Close the door.
2. Select a new cycle and temperature (if desired).
3. Push the START button.
Use the Drying Rack to dry items such as sweaters and pillows
without tumbling. The drum turns, but the rack does not move.
If your model does not have a drying rack, you may be able to
purchase one for your model. To find out whether your model allows
drying rack usage and for information on ordering, please refer to
the front page of the manual or contact the dealer from whom you
purchased your dryer.
NOTE: The rack must be removed for normal tumbling. Do not
use the automatic cycle with the drying rack.
To use the drying rack
1. Place drying rack in dryer.
Style 1: Your drying rack has front legs. Slide rear pegs into
the dimples on the back wall of the dryer. Lower the front legs
to rest on the dryer opening.
WARNING
Fire Hazard
Drying Rack Option