Whirlpool WGD97HEXL0 Instrukcja instalacji - Strona 16

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Suszarka Whirlpool WGD97HEXL0. Whirlpool WGD97HEXL0 38 stron. Gas dryer

DOOR

RE TR$,

(OFTION )

The following instructions

are for models with a round-shaped

door. For models with a square shaped door, an additional kit is

needed. Please contact your retailer, or see "For Assistance or

Service" in your Use and Care Guide.

Tools needed:

Min. 8" long Torx ®T25

screwdriver

#2 Phillips screwdriver

Move the door strike

Using a Torx ®t T25 screwdriver, remove the 2 screws securing

the door strike to the door frame of the dryer. Rotate the

strike 180 ° and attach to the opposite side of dryer door

frame, as shown.

Using a Torx ®T25 screwdriver, remove the 4 screws securing

the door hinge to the dryer and lift up and out to remove the

door. Place the door on a soft towel or other non-scratch

surface. Reinstall the 4 screws in the holes.

Position the door with the inside of the door facing up.

Using a Phillips screwdriver, remove the 10 screws securing

the inner door to the outer door. Lift off the inner door and

set aside.

1 ® TORXis a registered trademark of Acument Intellectual Properties, LLC.