Whirlpool YWED8200YW0 Instrukcja instalacji - Strona 17

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Suszarka Whirlpool YWED8200YW0. Whirlpool YWED8200YW0 36 stron. Gas dryer

DRYER RESULTS

Clothes are not drying satisfactorily, drying times are

too long, or load is too hot

Is the lint screen clogged with lint?

■

Lint screen shold be cleaned before each load.

Is the exhaust vent or outside exhaust hood clogged with

■

lint, restricting air movement?

Run the dryer for 5-10 minutes. Hold your hand under

the outside exhaust hood to check air movement. If you

do not feel air movement, clean exhaust system of lint or

replace exhaust vent with heavy metal or flexible vent. See

"Installation Instructions".

Are fabric softener sheets blocking the grille?

■

Use only one fabric softener sheet, and use it only once.

Is the exhaust vent the correct length?

■

Check that the exhaust vent is not too long or has too

many turns. Long venting will increase drying times. See

"Installation Instructions".

Is the exhaust vent diameter the correct size?

■

Use 4" (102 mm) diameter vent material.

Is the dryer located in a room with temperature below

■

45°F (7°C)?

Proper operation of dryer cycles requires temperatures

above 45°F (7°C).

Is the dryer located in a closet?

■

Closet doors must have ventilation openings at the top and

bottom of the door. The front of the dryer requires a minimum

of 1" (25 mm) of airspace, and, for most installations, the

rear of the dryer requires 5" (127 mm). See "Installation

Instructions".