3Com 3CRWE90096A - Wireless Access Point Skrócona instrukcja obsługi - Strona 12
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Sprzęt sieciowy 3Com 3CRWE90096A - Wireless Access Point. 3Com 3CRWE90096A - Wireless Access Point 20 stron. Wireless building-to-building bridge
Drukuj stronę
Quick Start Guide
Security Settings
3Com recommends using the strongest encryption setting supported by your
wireless bridge. The Bridge Manager offers 128-bit (strong) or 40-bit (basic)
shared-key encryption; however, 128-bit encryption may not be available to
you, depending on U.S. export restrictions to your country.
Both strong and basic encryption make use of Wired Equivalent Protection
(WEP) keys, which are expressed in hexadecimal notation. The WEP keys must
be set identically for every wireless bridge you configure for your network. You
can set the WEP keys in one of two ways. You can:
Have the keys automatically generated — Allows you to easily
I
enter any string of characters (as you would enter a password) that will
automatically generate the WEP keys the same way for every wireless
bridge you are configuring.
Enter the keys manually — Allows you to use an existing set of
I
encryption keys, but forces you to manually enter four long series of
hexadecimal numbers in exactly the same way for every wireless bridge
you are configuring.
Entering an Encryption String To enter an encryption string that will
automatically generate the WEP keys, follow these steps:
1 In the Network / Security tab of the Wireless Bridge Configuration screen,
select either 128-bit Shared Key or 40-bit Shared Key from the Security
setting list.
2 Click Encryption Key Settings.
The appropriate Encryption Key Settings screen appears.
8