3Com 3CRWEASY96A Skrócona instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Sprzęt sieciowy 3Com 3CRWEASY96A. 3Com 3CRWEASY96A 8 stron. Wireless lan outdoor bridge solution

Drukuj stronę

309-2273-001AA.fm Page 6 Monday, February 3, 2003 4:54 PM

Install the Software and Tools

Adobe Acrobat Reader. You will need the latest version of Adobe Acrobat Reader installed

on your computer in order to view the PDF documentation.

Browser Requirements. In order to use the Conﬁguration Management System, you will

need Internet Explorer 5.0 or newer, or Netscape 6.0 or newer. We recommend making this

the default browser on the workstation used for system conﬁguration and management.

After hardware installation is complete, install items from the installation CD as follows:

Turn on the computer and put the 3Com CD in the CD-ROM drive.

The setup menu should appear when the CD autostarts. Follow the instructions on

the screen.

If no menu appears, you can run the startup program from the Windows Start menu: Start/

Run/d:setup.exe (where d: is the CD-ROM drive).

From the CD startup menu, select Install the Tools and Documentation .

This option installs the Wireless Infrastructure Device Manager Tool which you can use to

monitor bridges and select devices for administrative changes. It also installs the User Guide

in HTML and PDF formats.

Establish Wireless Association

At initial startup, the default ESSID is 3Com , no security is set, and channel selection is automatic. Also,

unless it detects a DHCP server on the network, the bridge defaults to an IP address of 169.254.xxx.1,

where xxx is the last two bytes of the MAC address. The User Guide describes these and other default

settings and tells you how to change conﬁguration parameters. The User Guide is included on the 3Com

CD in HTML and PDF formats. After the bridge and software utilities are installed, you can conﬁgure the

bridge as follows:

Launch the bridge conﬁguration and specify the Country Selection from the pull-down

menu. The highest allowable power level is set automatically. This selection ensures proper

compliance with the FCC and any other regulatory bodies.