Clank Chaos Podręcznik - Strona 6
Przeglądaj online lub pobierz pdf Podręcznik dla Sprzęt nagrywający Clank Chaos. Clank Chaos 12 stron.
Również dla Clank Chaos: Podręcznik (10 strony), Skrócona instrukcja obsługi (2 strony)
Drukuj stronęInput assign
The input assign section shows four statuses,
each one corresponding to the four inputs on the
top line of Chaos. Each status has two values, ON
or OFF, with the exception of LED 9 which controls
multiple tasks.
•
LED 7 ON (default for channels 2 to 6): the
channel is synced to the master clock
•
LED 7 OFF (default for channel 1): the channel
is un-synced and has its own timing expressed
in millisecond between consecutive beats
(see TCM section p.8)
•
LED 8 ON (default): a gate sent in the loop in
will turn the loop function for this channel on
and off
•
LED 8 OFF: sending a gate to loop in will not
affect the selected channel
•
LED 9 GREEN ON: All the channel's CV values
will be sampled from the CV in excluding the
internal random generator. Keep in mind that
modifiers will still have effect on the sampled
voltage!
•
LED 9 RED ON: The channel's ground
transpose (see VCM section p.9) is controlled
by the values sampled from the CV in.
•
LED 9 ORANGE ON: Hold the encoder until
the LED turns to orange. Now you can use
an external voltage patched into CV in to
move between the saved slots (0-5V). Hold
the encoder again to go back to normal
functionality.
VERY IMPORTANT: this last function is global and
not channel specific because the save/recall
function recalls every channel's saved settings
from a save slot. (See save/recall section)
•
LED 9 OFF (default): the internal random
voltage generator will be used to generate the
new values
•
LED 10 ON (default): chaos mode can be
activated by a gate on the chaos input. The
input assign LED will quickly blink violet
•
LED 10 OFF LED: gate signals on chaos
input won't have any effects on the selected
channel
Scale quantization/slewing
To slew the selected channel, press the
quant/slew button once [4]. The right quant/slew
LED will light up in white to indicate that.
To choose a quantization mode, hold the quant/
slew button and turn the encoder at the same
time to scroll between the possible quantization
modes. To select a scale simply release the button.
The left quant/slew LED will stay on indicating the
current scale's color. While keeping quant/slew
pressed, the current scale will be shown blinking
on the value bar as well.
There are three sets of modes. Each time you
reach the end of a set turning the encoder CW will
make it skip to the next set and vice versa. The
first set includes 10 basic scales, the second set
includes the 7 modes of the melodic major scale,
and the third set includes the 7 modes of the
melodic minor scale.
First set:
•
Unquantized (Default)
•
Chromatic
•
Octave
•
Major pentatonic
•
Minor pentatonic
•
Blues
•
Arabic
•
Pelog
•
Hirajōshi
•
Chinese
Second set:
•
Ionian
•
Dorian
•
Phrygian
•
Lydian
•
Mixolydian
•
Aeolian
•
Locrian
Third set:
•
Ascending melodic minor
•
Dorian b2
•
Lydian augmented
•
Lydian dominant
•
Mixolydian b6
•
Locrian #2
•
Super Locrian
6