FIREPOINT EMS 5000 Instrukcja instalacji - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Wyposażenie morskie FIREPOINT EMS 5000. FIREPOINT EMS 5000 8 stron. Radio dome sounder

EMS 5000 FIREPOINT

1. Logging on a Dome Sounder

If the installation has been ordered as a complete system, the devices and panel will be

supplied already "pre-programmed". In this scenario go straight to the "Sounder

Volume" section. Otherwise, when the dome sounders are purchased separately, they

must be added manually to the system. The process of adding radio devices to the 5000

FirePoint Control Panel, is largely carried out automatically, by the panel's own operating

system. It is usual practice for each device to require "logging on" to the system. In such

cases, the following action must be taken.

The Dome sounder is shown below, in Figure 1, with the base removed. When removing

the AA battery as shown below, the logon button is exposed.

The dome sounder can be programmed to the system by the following procedure:

To log the device onto the 5000 FirePoint, take the device to the front of the panel.

Insert the key into the Panels Control Key switch, located on the bottom right of the

Panel.

Step

Action

With the key in the "ON" position, the screen will

display:

Press the "0" key and the screen will now display:

Press the "" key until the screen displays:

Press the "YES" key and the screen will now

display:

Figure 1

Screen Display

Panel in Access

Date

|***Options *** *

> Passwords

| Time and Date

Yes =Select

| Logging

> Fire System Opts <

| Remote Access

Yes = select

|** Fire system **

> Dev. Disable /Test<

| Net. Disable /Test |

Yes= Select

TSD240 Iss 3 25/06/15 AJM

Time