AER AK15 plus Instrukcja instalacji - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Wzmacniacz AER AK15 plus. AER AK15 plus 12 stron.
Również dla AER AK15 plus: Arkusz instrukcji (2 strony)

Drukuj stronę

How to react:

If you don't have a luthier at hand, go through

the following steps.

Assuming the installation of the saddle is

correct, all surfaces even and straight and the

pickup is working properly, you can add layers

of scotch tape to the saddle at weak positions

to increase the pressure on relevant crystals.

Sounds simple, but needs a little experience as

all piezos are connected and a change of one

factor may have effect on others too. To find

the proper balance may require a little extra

time and work which is annoying for everyone

– especially the installer – but it has to be done

– no way around it!

In general

We have designed the AK15 plus system to

produce the clearest and most dynamic sound

possible. This high dynamic output means that

your battery life will be less long than with oth-

er mainstream systems. The rewards however

outweigh the use of an extra battery.

The AK15 plus system can be used without any

batteries when using the 9 Volt phantom power

of the AER Compact 60/4 or Domino 3 ampli-

fier. Most of our other amplifiers can be easily

modified to provide 9 Volt phantom power

on the jack input. Check your manual for this.

Phantom power needs a standard stereo jack

cable connection. Our high output volume is

suited for all amplification systems.

Good sound is an inspiration for life.

We hope we can contribute to this with the

AK15 plus.