Whirlpool 36'' Freestanding Gas Range Instrukcja instalacji - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Okap wentylacyjny Whirlpool 36'' Freestanding Gas Range. Whirlpool 36'' Freestanding Gas Range 28 stron. 30" and 36" gas sealed burner cooktop
Również dla Whirlpool 36'' Freestanding Gas Range: Instrukcja instalacji (13 strony), Instrukcja instalacji (10 strony), Instrukcja instalacji (7 strony), Instrukcja instalacji (7 strony), Instrukcje instalacji oraz instrukcja obsługi i konserwacji (28 strony), Instrukcja instalacji (6 strony), Instrukcja instalacji (7 strony), Instrukcje instalacji (5 strony)

Drukuj stronę

Whirlpool 36'' Freestanding Gas Range Instrukcja instalacji

Secure the bottom of the duct with 2 - 4.2 x 8 mm screws.

The range hood is designed to remove smoke, cooking vapors and

odors from the cooktop area. For best results, start the hood

before cooking and allow it to operate several minutes after the

cooking is complete to clear all smoke and odors from the kitchen.

The hood controls are located on the front side of the canopy.

A. Louver holes (non-vented

[recirculating]

installations only)

B. Duct cover

C. Control panel

D. Light switch (ambient

lighting)

RANGE HOOD USE

E. Glass canopy

F. Perimetric cover

G. LED lights

H. Metal grease filters (located

behind the perimetric cover)

Complete Installation

1. For non-vented (recirculating) installations only, install

charcoal filters over metal grease filter. See the "Range Hood

Care" section.

2. Install metal filters. See the "Range Hood Care" section.

3. Check the operation of the range hood blower and light. See

the "Range Hood Use" section.

NOTE: To get the most efficient use from your new range hood,

read the "Range Hood Use" section.

Range Hood Controls

A. On/Off LED task light button

B. Blower Off button

C. Blower speed minimum button

D. Blower speed medium button

E. Blower speed maximum button

Operating the LED task light

The On/Off light button controls both lights. Press once for On

and again for Off.

Operating the blower

The Blower Speed buttons turn the blower on and control the

blower speed and sound level for quiet operation. The speed can

be changed anytime during fan operation by pressing the desired

Blower Speed button.

The Blower Off button turns the blower Off.

Operating the Ambient Lighting

The switch controls the ambient lighting.

1. Press to the left to turn AUTO On.

2. Press to the right to turn AMBIENT LIGHTING On.

3. Press to the center to turn AMBIENT LIGHTING or AUTO Off.

NOTE: When the Ambient Lighting is placed in the AUTO setting,

a sensor will automatically sense if it is dark in the area around the

range hood. The Ambient Lighting will turn on and stay on until it

senses there is enough light in the area around the range hood, or

the Ambient Lighting switch is placed in the ON or OFF position.