Whirlpool AKR 6222 Instrukcja obsługi - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Okap wentylacyjny Whirlpool AKR 6222. Whirlpool AKR 6222 15 stron. Curved glass hood

Ducted mode air exhaust system
The hood draws the cooking fumes saturated with fumes and odor through
the grease filters and expels it to the outside through an outlet pipe.
Caution: To reduce the risk of fire, use metal
ductwork only.
1. Decide where the ductwork will run
between the hood and the outside.
2. A straight, short duct run will allow the
hood to perform most efficiently.
3. Long duct runs, elbows, and transitions
will reduce the performance of the hood.
Use as few of them as possible. Larger
ducting
may
performance with longer duct runs.
4. Attach an adequate length of
adapter.
5. The air must not be discharge into a flue that is used for exhausting
fumes from appliances burning gas or other fuels" "Regulations
concerning the discharge of air have to be fulfilled.
6. Install a roof/wall cap. Connect round metal ductwork to cap and
work back towards hood location. Use duct tape to seal the joints
between ductwork sections.

Electrical Connection

* Electrical wiring must be done by a qualified person(s) in
accordance with all applicable codes and standards. Turn off
electrical power at service entrance before wiring.
* If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order
to avoid a hazard.
* Do not use the plug and an extension cord other than the ones
initially supplied with the hood.
* The earthing of this hood is compulsory. Do not remove ground
prong of the plug.
be
required
for
φ
160mm round duct to the air outlet
9
best