Whirlpool AKR 891 IX Ważne instrukcje dotyczące bezpieczeństwa - Strona 5
Przeglądaj online lub pobierz pdf Ważne instrukcje dotyczące bezpieczeństwa dla Okap wentylacyjny Whirlpool AKR 891 IX. Whirlpool AKR 891 IX 10 stron.
Drukuj stronę
ITEMS SUPPLIED
Remove all components from their packaged. Check that everything is included.
• Assembled hood with motor, light bulbs, perimeter suction panel and grease filters installed.
• 1 Chimney support bracket
• 1 Hood support bracket
• Assembly and user instructions
• 1 installation template
• 6 Ø 8mm wall plugs
• 6 Ø 5x45 screws
• 2 Ø 2.9x6.5 screws
• 2 Ø 3x9 screws
• 1 - Torx T10 adapter
• 1 - Torx T20 adapter
• 1 discharge pipe adapter, Ø 120-125
INSTALLATION - PRELIMINARY ASSEMBLY INSTRUCTIONS
The hood has been designed to be installed and used either as a "Suction Model", or as a "Filter Model".
Suction model
Cooking steam is sucked and channelled outside the house through a discharge duct (not supplied), fitted to the hood steam outlet.
Ensure that they type of fitting between the hood steam outlet and the discharge duct fits correctly to both.
IMPORTANT: If already installed, remove the carbon filter/s.
Filtering model
The air is filtered through one of the carbon filters and then resent to the room.
IMPORTANT: Ensure appropriate air circulation around the hood.
Before using the hood ensure that the carbon filter/s has/have been installed.
The hood should be installed away from particularly dirty areas, windows, doors and heat sources.
The hood is sold with all necessary components for installation on most types of walls or ceilings. However, ask a qualified technician to check that the items
supplied are suitable for the type of wall/ceiling.
INSTALLATION SIZES
Side cabinets
65 cm (gas or mixed cookers)
50 cm (electric cookers)
(1)
based on the width of the hood
600 mm min
(1)
Side cabinets
900 mm min
(1)
central line
GB5
hob surface