Whirlpool AKR1912/IXS Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Okap wentylacyjny Whirlpool AKR1912/IXS. Whirlpool AKR1912/IXS 14 stron. T- box hood

4. Attach an adequate length of

adapter. Let the exhaust run for a minimum of 1 meter in Straight line in

between bends / elbows for better efficiency.

5. The air must not be discharge into a flue that is used for exhausting

fumes from appliances burning gas or other fuels" "Regulations

concerning the discharge of air have to be fulfilled.

6. Install a roof/wall cap. Connect round metal ductwork to cap and

work back towards hood location. Use duct tape to seal the joints

between ductwork sections.

Electrical Connection

* Electrical wiring must be done by a qualified person(s) in accordance with

all applicable codes and standards. Turn off electrical power at service

entrance before wiring.

* If the supply cord is damaged, it must be replaced by the manufacturer, its

service agent or similarly qualified persons in order to avoid a hazard.

* Do not use the plug and an extension cord other than the ones initially

supplied with the hood.

* The earthing of this hood is compulsory. Do not remove ground prong of

the plug.

OPERATION OF CONTROLS

FUNCTION KEYS:

A= Timer (automatic shut off)

B= Turn on at Speed 1 / adjust / switch off

C= digital display screen (showing timer and speed)

D= Turn on at Speed 3 / adjust / switch off

160mm round duct to the air outlet