Whirlpool AKR9152IXDS-C Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Okap wentylacyjny Whirlpool AKR9152IXDS-C. Whirlpool AKR9152IXDS-C 16 stron. Telescopic hood

lnstrudions for Installation

Install range hoods in accordance with the manufacturer's instructions� The

range hood clearance should ha ve a minimum 650mm to 700mm from the

top of the cooking surface to the underside of the Hood�

WARNING: DO NOT penetrate any screws into the range hood as this may

result in electrical hazards.

WARNING: Failure to install the screws or fixing device in accordance with

these instructions may result in electrical hazards.

If a connection flue composed of two parts is used, the upper part must be

placed outside the lower part�

Exhaust air must not be discharged into a flue which is used for exhausting

fumes from appliances burning gas or other fuels� Installation must comply

with any local regulations concerning the discharge of exhaust air�

Before proceeding with the assembly, remove the anti-grease filter(s) (Fig.5)

so that the unit is easier to handle� Prepare the hole in the ceiling or wall for

the evacuation of the air.

Fig�5

Position the hood, then mark and drill the holes (A) according to the

distances indicated (Fig�6)�