Whirlpool GZ9736XSS Instrukcje instalacji oraz instrukcja obsługi i konserwacji - Strona 9
Przeglądaj online lub pobierz pdf Instrukcje instalacji oraz instrukcja obsługi i konserwacji dla Okap wentylacyjny Whirlpool GZ9736XSS. Whirlpool GZ9736XSS 32 stron. 30" (76.2 cm) and 36” (91.4 cm) wall-mount canopy range hood
Również dla Whirlpool GZ9736XSS: Podręcznik wymiarów (1 strony)
Drukuj stronę
WARNING
Excessive Weight Hazard
Use two or more people to move and install
range hood.
Failure to do so can result in back or other injury.
1. Using two or more people, lift the range hood into the
prepared installation location.
2. Align the rectangular opening on the back of the range hood
with the hood mounting bracket. Slowly lower the range hood
until it securely engages the bracket.
A
A. 3.9 x 9.5 mm pan head screws
B. Wall
C. Hood mounting bracket
3. Level the range hood with two 3.9 x 9.5 mm pan head
screws.
4. Mark location of 4 mounting holes on wall with pencil.
5. Remove range hood from mounting bracket.
6. If installing screws into wood, drill four
OR
If using drywall anchors, drill four
7. If mounting the range hood to drywall, insert drywall anchors.
8. Lift range hood back into the prepared installation location.
9. Secure the range hood with four 4.8 x 38 mm pan head
mounting screws.
C
A. Range hood
B. Wall
C. 4.8 x 38 mm pan head mounting screws
Install Range Hood
B
C
" (4 mm) pilot holes.
" (7.9 mm) pilot holes.
B
10. Mount the wiring assembly to the range hood with
two 3.9 x 9.5 mm pan head screws.
A
A. 3.9 x 9.5 mm pan head screws
B. Wiring assembly
Vented Installation - Style 1
1. Attach an adequate length of 6" (15.2 cm) round metal duct
to the range hood duct connector.
A. 6" (15.2 cm) round metal duct
B. Duct connector
2. Seal connection with vent clamp.
A
A. 6" (15.2 cm) round metal duct
B. Vent clamp
B
A
B
B
9