Whirlpool UXD8630DYS0 Instrukcja obsługi i konserwacji - Strona 13
Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Okap wentylacyjny Whirlpool UXD8630DYS0. Whirlpool UXD8630DYS0 36 stron. 30" and 36" retractable (pop-up) downdraft vent system
Drukuj stronę2. Remove 4 screws attaching the terminal box cover.
A
....................
A. Terminal box cover
3. Determine which direction (front or rear) the home power
supply cable will enter the terminal box. Remove the
appropriate
knockout from the front or rear panel and install a
1/2"(12.7 mm) UL listed or CSA approved conduit connector.
4. Using 2 or more people, insert the downdraft vent into the
countertop cutout. Position downdraft vent so it is centered
in the cutout with the rear flange over the edge of the cutout
and the rear of the vent box against the edge of the cutout.
G
..............................................................
F
........................
D
l!
/
A. Rear flange of downdraft vent
B. Edge of cutout in countertop
C. Rear of downdraft
vent
D. Cabinet back
E. Lower support leg
F. Cabinet floor
G. Countertop
5,
Drill 2 pilot holes through each of the undercounter
mounting
brackets into the underside of the countertop.
Using 2 screws
(not provided) of the appropriate length, mount the brackets
to the countertop.
IMPORTANT:
Select a screw length that will not allow the
screws to go through the countertop when tightened.
A. Screws
B. Backsplash
C. Countertop
6. Check that the downdraft vent is level vertically. Loosen the
lower support legs screws and position the legs against the
cabinet floor.
7. Fasten the lower support legs to the cabinet floor with screws
(not provided).
\J' A
A. Screw (not provided)
8. Tighten the lower support legs screws.
_
..... _ /_ _W_ _
Electrical Shock Hazard
Disconnect
power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical
shock.
1. Disconnect
power.
13