Whirlpool UXT4136ADW0 Instrukcje instalacji oraz instrukcja obsługi i konserwacji - Strona 10

Przeglądaj online lub pobierz pdf Instrukcje instalacji oraz instrukcja obsługi i konserwacji dla Okap wentylacyjny Whirlpool UXT4136ADW0. Whirlpool UXT4136ADW0 28 stron. 30" (76.2 cm) and 36" (91.4 cm) range hood

Drukuj stronę

RANGE HOOD USE

The range hood is designed to remove smoke, cooking vapors

and odors from the cooktop area. For best results, start the hood

before cooking and allow it to operate several minutes after the

cooking is complete to clear all smoke and odors from the

kitchen.

The hood controls are located on the front panel of the range

hood.

A. Incandescent

light housing and cover

B. Grease filter retainer

C. Grease filter

Range

Hood

Controls

Off

On@Off

Low@

High

A. Fan speed switch

B. On/Off light switch

Operating

the light

Press the light switch to the left to turn the light On.

Press the light switch to the right to turn the light Off.

Operating

the fan

The fan has 2 speeds.

Press the fan switch to the left for Low speed.

Press the fan switch to the right for High speed.

Return the fan switch to the center to turn the fan Off.

RANGE HOOD CARE

IMPORTANT:

Clean the hood and grease filters frequently

according to the following instructions. Replace the grease filter

before operating hood.

Exterior Surfaces:

IMPORTANT:

Do not use soap-filled

scouring pads, abrasive

cleaners, cooktop polishing creme, steel wool, gritty washcloths

or paper towels.

To avoid damage to the stainless steel, do not use cleaners that

contain chlorine.

Cleaning

Method:

•

Liquid detergent or all-purpose

cleaner:

Rinse with clean water and dry with a soft, lint-free cloth.

•

Glass cleaner to remove fingerprints.

•

For stainless steel models, rub in the direction of the grain to

avoid scratching

or damaging the surface.

•

For stainless steel models, use Stainless Steel Cleaner

and Polish, Part Number 31462A (not included): See

the "Assistance

or Service" section to order.

Metal or Charcoal Grease Filter

To Clean the Filter:

1. Remove the screw from the grease filter retainer.

2. Turn the grease filter retainer to release the filter.

A. Filter retainer

3. For vented installations:

Wash the metal filter as needed in a

dishwasher or hot detergent solution.

For non-vented

(recirculating)

installations:

Replace the

metal filter with a charcoal filter. The charcoal filter is not

washable. It should last up to 6 months with normal use. For

information

on ordering, see the "Assistance

or Service"

section. Dispose of old charcoal filter.

To Replace

the Filter:

1. To reinstall the filter, place the back edge of the filter into the

channel at the rear of the hood. Push the filter into place and

turn the filter retainer to secure the filter to the range hood.

2. Replace the screw in the grease filter retainer.