CalderaSpas Utopia Series Geneva Instrukcje przed dostawą - Strona 13
Przeglądaj online lub pobierz pdf Instrukcje przed dostawą dla Wanna z hydromasażem CalderaSpas Utopia Series Geneva. CalderaSpas Utopia Series Geneva 17 stron.
Drukuj stronę
IMPORTANT: The following must be followed to properly install the equipment compartment door.
•
Place top of door or panel directly below bartop against the frame of the spa. For Utopia spas, first lift the
fiber optic cable out of the way.
•
Push bottom of door or panel against the spa frame.
•
Slide door or panel upward (pushing in on center of door to ensure door clips catch) until screw holes line
up, making sure that the exterior fiber optic light cable will fit into the fixture.
•
Slightly pull on door or panel. If door remains against the spa, then replace the screws.
•
If the door does not lock into position, repeat the previous steps.
Geneva
wirinG diaGramS
, taHitian
, niaGara
™
®
cantaBria
, elation
®
™
®
Power
jumpers
Page 13