CalDigit VR Pierwsze kroki - Strona 5

Przeglądaj online lub pobierz pdf Pierwsze kroki dla Obudowa CalDigit VR. CalDigit VR 20 stron.

A. Installing the CalDigit VR

The CalDigit VR is ready to use out of the box.

1. Select the desired interface, FireWire 400, FireWire 800, USB

2.0 or eSATA. A FireWire 800 and eSATA cable are included.

2. Connect the power supply to the CalDigit VR, then connect

the desired interface cable.

Note: If you would like to use eSATA, there are two

options. If you already have an eSATA controller

card or port simply connect the eSATA cable. If you

have a Mac or PC workstation that has internal SATA

port (late model Mac Pros) you can use the included

eSATA extender*. For installation instructions please

refer to the CalDigit eSATA Extender manual. If your

workstation does not have an internal SATA port and

you would like to use eSATA with the CalDigit VR

you can purchase one of CalDigit's eSATA controller

cards (FASTA-1ex, FASTA-2e or FASTA-4e). For more

information visit