Firestone Air-rite 2581 Instrukcja instalacji - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Akcesoria samochodowe Firestone Air-rite 2581. Firestone Air-rite 2581 17 stron.
Drukuj stronę
AS-1
AS-1
Use as template to
mark drill locations.
2581 Installation Instructions
EXH
EXH
AS-2
AS-2
SUP
SUP
IF YOU ARE USING THE OPTIONAL FIRESTONE AIR ACCESSORY MOUNTING
KIT, SKIP THIS STEP AND REFER TO THE MOUNTING KIT'S INSTRUCTIONS.
Drill within reach of the ground wire
ring terminal on body or frame of vehicle.
AIR ACCESSORY MOUNTING KIT CANNOT
BE USED AS A GROUNDING LOCATION FOR
THE AIR COMPRESSOR.
AIR COMPRESSOR
Use as template to
mark drill locations.
ECU
DRILL HOLES FOR AIR COMPRESSOR AND ECU
CHECK SURROUNDING AREA AND BACK SIDE OF MOUNTING
LOCATION TO AVOID DRILLING INTO EXISTING LINES OR WIRING.
BLACK
GROUND
WIRE
3/16"
OPTIONAL ECU MOUNTING
1
Using the Air Compressor
and ECU as templates, mark
drill locations as shown with
a punch or marking tool.
2
Mark Air Compressor
ground wire fastening
location within reach of the
ground wire ring terminal.
3
Drill 3/16" diameter holes.
Remove any burrs and
debris from drill holes.
ASSURE THAT YOU INSTALL THE
AIR COMPRESSOR AND ECU CLOSE
ENOUGH SO THE CONNECTORS ON
THE WIRE HARNESS WILL REACH
THEM BOTH.
If there is no other
mounting option,
use at least two
Large Nylon Ties
ECU
to secure ECU
to the location
determined in
Planning the
Install section.
2
6