FIREtec FTEN1 Skrócona instrukcja obsługi - Strona 10
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Panel sterowania FIREtec FTEN1. FIREtec FTEN1 10 stron. 1, 2 & 4 zone fire detection and alarm control panels
Drukuj stronęDATE
TIME
EVENT
DATE
ACTION REQUIRED
INITIALS
COMPLETED
QUICK USER GUIDE FOR 1, 2 & 4 ZONE FIRE PANELS
USER CODE
BUTTON
3545
1
– Reset
2
– Silence Buzzer
3
LEVEL 2a
– Silence Alarms
4
– Evacuate
5
– Lamp Test
5344
1
– Reset
2
– Silence Buzzer
3 –
LEVEL 2b
Walktest
4
– Disable
5
– Exit
ACTION
Return the system to a normal condition after
a fire or fault has occurred. This should only
be performed when the fire or fault has been
identified and alarms have been silenced.
Stops the sounding of the internal buzzer.
Turns off the fire alarm sounders after the fire
condition has been identified.
Activates the fire alarms sounders to evacuate
the building. Other outputs will not be
triggered.
Illuminates all the leds and operates the
internal buzzer. Resets after about 3 seconds.
Return the system to a normal condition after
a fire or fault has occurred. This should only
be performed when the fire or fault has been
identified and alarms have been silenced.
Stops the sounding of the internal buzzer.
Allows detectors and callpoints to be tested
on the zones. The sounders will sound for 1
second then reset. Zones in test condition are
indicated on the panel.
Allows zones & alarms to be disabled if a fault
occurs or work is being carried out in an area.
This does not affect the operation of any other
zones. Select as follows:
Enter code 5344 and Press 4
3 - Moves flashing light to the required zone.
4 - Selects/deselects the zone/alarm.
5 - To exit the function
Exit from Level 2b function