Alcohawk AlcoHawk PT500P Instrukcja obsługi - Strona 12

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt testowy Alcohawk AlcoHawk PT500P. Alcohawk AlcoHawk PT500P 16 stron.
Również dla Alcohawk AlcoHawk PT500P: Instrukcja obsługi (14 strony)

Drukuj stronę

CALIBRATION

Calibration of the AlcoHAWK

PT500P occurs during manufacturing us-

ing advanced alcohol simulation equipment. The manufacturer passing

known alcohol concentrations through the sensor to set baseline values

for testing. During testing, the unit compares users' breath samples

to these baseline values. If the verification determines that the BAC is

not consistent with actual BAC levels, a technician calibrates the unit.

The accuracy of breath alcohol testers can fluctuate after six to twelve

months, depending on frequency of use and operating conditions.

If the unit is providing inconsistent results or unusually high or low

readings, the unit may need calibration. A general rule of thumb is to

have the unit calibrated every 200 tests (see Test Counter, pg.8).

However, at a minimum, a technician should recalibrate this unit

at least every six to twelve months. Monthly calibrations may be

required if the unit is used daily.

Please visit www.q3i.com or call 888-399-1687 for calibration or support.

ONE-YEAR LIMITED WARRANTY

Q3 Innovations, LLC (Q3I) warrants this unit to be free from defects in

workmanship or material (excluding calibration) under normal use for

ONE (1) YEAR from the date of retail purchase by the original buyer

("Warranty Period").

The warranty covers parts and labor on covered repairs and

ground freight back to the customer (USA only). Except as pro-

vided above, Q3I provides this product "as is."

If a defect arises and Q3I receives a valid claim within the War-

ranty Period, at its option, Q3I will either (1) repair the product,

(2) exchange the product with a product that is new or which has

been built from new or serviceable used parts and functionally

equivalent to the original product, or (3) refund the purchase price

of the product. If a refund is given, the returned product becomes