Alcohol Countermeasure Systems Alcolock V3 B-2 Series Instrukcja obsługi - Strona 16
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt testowy Alcohol Countermeasure Systems Alcolock V3 B-2 Series. Alcohol Countermeasure Systems Alcolock V3 B-2 Series 20 stron.
Drukuj stronę
DISPLAY MESSAGES
The ALCOLOCK V3 device may not accept a breath test and could display error
messages instead. To minimize errors, make sure that the handset is connected
properly, the vehicle's battery is in good condition, and that mobile phones are not in
use during breath tests. The following is a list of messages (including error messages)
that the handset may display:
DISPLAY MESSAGES
ADR-incompatible
Battery error
Calibration expired *
Cancelled
Try again
Clock error
Communication error
Error Code 10, 30, 40,
45, 50
Invalid sample
11
DESCRIPTION
Certain vehicles require an
ADR approved handset to
transport hazardous goods.
Occurs when a non-ADR
handset is connected to an
ADR approved vehicle.
The batteries of the handset
and/or ECU are depleted.
If the handset is not calibrated
before the expiry date, a
calibration expired message
is displayed. You may be able
to start your motor, or your
motor may be blocked from
starting; this depends on your
device settings.
The breath test was cancelled
before completion.
The internal clock circuit has
failed. The handset will still
operate correctly, but the time
and date information will be
incorrect.
The handset and ECU are not
communicating properly.
There is a problem with the
handset.
The handset could not
analyze the breath sample
that was given.
WHAT TO DO
Find the correct ADR approved
handset and connect it to the
vehicle.
Contact your dealer to arrange for
service.
Contact your dealer to have the
device calibrated.
Retry the test. If the message
persists, contact your dealer.
Contact your dealer.
Contact your dealer.
Retry the test. If the message
persists, contact your dealer.
Retry the test. If the problem
persists, contact your dealer.
ALCOLOCK V3 SERIES B-2