DIR H1108 Podręcznik - Strona 7

Przeglądaj online lub pobierz pdf Podręcznik dla Produkty higieny osobistej DIR H1108. DIR H1108 12 stron. Facial steamer

 install the casters to the Standing: First, put the casters on φ12 spring washer, φ12 flat gasket,

then insert into the base plate (pay attention to that the belt brake casters installed in the front

and put a φ12 flat gasket after tighten M12 cover up . While tighten the cover up, please use

17# open-end spanner to fix the nut at the bottom of the floor, then tighten the cover up with 19#

open-end spanner.

 Install aluminum pillar: fit the Aluminum pillar to the three holds on bottom plate, then connect

with M10×20 M10×20 Hex cylinder head machine silk, then tighten up screws with M10 allen

wrench.

 Install the roof (magnifying glass) components: fit the Aluminum pillar to the three holes on

bottom plate, then connect with M10×20 M10×20 Hex cylinder head machine silk, then tighten

up screws with M10 allen wrench.

install the sprayer



until the column falling down 15 mm naturally.

At first you should put the host machine horizontally to the hole of the column