AERA ZQ 032 Instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odkurzacz parowy AERA ZQ 032. AERA ZQ 032 12 stron.

Drukuj stronę

1. Care and Maintenance

IMPORTANT SAFETY INSTRUCTIONS

Power supply

• Only connect the device to a plug that has been

installed in accordance with regulations. Do not

use any desk socket or extension cable.

• The voltage specified on the nameplate of the

device must correspond to that of your mains

supply.

• Be careful when running the power cord that

there is no risk of it causing a trip hazard during

the operation of the device.

• Keep the device and power cord well away

from hot surfaces and naked flames, as well as

sharp edges. Be careful to ensure the cord does

not get jammed during use (e.g. in doors).

• Never touch the device, power cord and mains

plug with moist or wet hands.

• Never immerse the power cord and mains plug

in water or other liquids. Never use the device

to clean receptacles filled with water (e.g. filled

pools, rain barrels, etc.) There is a risk of fatal

electric shock!

• When you pull out the plug, always grip the

plug and never the cable.

Protection againt burns

• Please always remember while using the

device that it generates very hot steam. Risk of

scalding! Avoid any contact whatsoever with the

steam given out and heated device sections, and

only replace steam nozzles and attachments

once the device has cooled down.

• Be careful when using the device that you do

not inadvertently place your head, hands or

any other part of the body in the vicinity of the

steam nozzle and the heated sections of the

device.

• Only hold the device using the areas specially

designed for this purpose.

• Never direct the steam jet from the device

towards people, animals or plants.

• Never operate the device when there is any sign

of damage to the steam hose or the accessories.

Filling / emptying the water heater

• Before filling or refilling the device, always

switch it off and unplug from the mains supply.

30777-English_2 .indd 17

• Before opening the safety catch, the steam

pressure within the device must be reduced and

the device be allowed to cool for at least 15

minutes! If the device remains very hot, there

is the risk of water spraying back out when it is

filled.

• Always be careful when opening the safety

catch, since a leftover amount of hot steam may

escape.

• Please be careful to note, when filling the water

heater, that the maximum capacity of 500 ml

must not be exceeded.

• When filling the water heater, always only use

clean tap water. Never fill the water heater with

cleaning agents, oils, solvents, chemicals or

other liquids. Moreover, never add any cleaning

agent, fragrance or any other kind of additive

to the water. This could result in damage to the

device.

• Please be careful to note, when emptying the

water heater, that the water may remain hot.

Usage

• The device must not be used to clean or treat

electrical devices! Be careful to ensure that the

steam jet is never directed towards electrical

devices or mains sockets. Risk of electric shock!

• Never use the device in the vicinity of heat

sources, naked flames, or in a location where

flammable gases, liquids or dust are present.

Risk of explosion!

• Ensure the device is always placed on a firm

and level surface. The device must not be

carried or tilted during operation!

• Never leave the device unsupervised during

operation or while it is connected to the mains

supply.

• The device must not be used without water. Risk

of overheating.

• The safety catch must not be opened while

the device is in operation. The filled water

is strongly heated in order to generate the

required steam pressure. There is a risk of

scalding from steam escaping if the safety catch

is suddenly opened!

• The steam delivery button must not be jammed

during operation.

27/2/07 9:28:46 AM