AERA ZQ 032 Instrukcja obsługi - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odkurzacz parowy AERA ZQ 032. AERA ZQ 032 12 stron.

Drukuj stronę

1. Care and Maintenance

CARE AND MAINTENANCE / HOW TO USE

Descaling the reservoir

Assuming the device is not used exclusively with

distilled water, it must be descaled at regular

intervals. The relevant intervals depend on the

hardness of the water used and the frequency

of use. If your tap water is particularly hard, the

device should be regularly descaled, after it has

been filled 10 – 15 times.

To ensure the operational safety of the device, it is

particularly important to descale the water heater

when signs of calcification become apparent (long

warm-up time, reduced steam pressure).

• Switch off the device, unplug from the mains

and allow the device to cool down thoroughly..

• Once the device has cooled down and the

excess steam has been released, open the

safety catch and empty the entire contents of the

water heater.

• Subsequently fill the water heater with a mixture

of 100 ml vinegar and 300 ml water and let the

descaling solution act for approx. 8 hours.

• CAUTION! The steam cleaner must not be

used, when it contains descaling solution! Do

not replace the safety catch of the water heater

during the descaling process.

• Once sufficient active time has elapsed, empty

out the descaling solution from the water heater.

To do so, turn the device over so that the

descaling solution can run out of it.

• To remove the remainder of the descaling

solution, the water heater must subsequently

be rinsed out 2 to 3 times with clean water,

whereupon it may be reused again.

Care of accessories

• Allow all accessories to dry thoroughly after use

and before stowing them away..

• Do not allow brush attachments to rest on their

bristles after they have cooled and dried, since

the pressure could deform them.

Care of the floor cloth

To guarantee the cleaning power and longevity of

the microfiber cloth, please adhere to the following

guidelines:

30777-English_2 .indd 23

• Wash and dry new microfiber cloths before

using for the first time.

• Clean the microfiber cloth at a temperature of

60°C in the washing machine.

• Do not wash the microfiber cloth together with

clothes that fuzz easily, since such fibers may

be caught up in the cloth and subsequently

deposited on surfaces where it is used for

cleaning.

• The cleaning agent use should preferably

be liquid, since the granules of dry cleaning

material do not always dissolve and may remain

within the cloth. This could result in scratches

and stripes on the surface being cleaned when

next in use.

• Be careful to ensure that the cleaning agent

used contains no bleaching agent, since this can

attack the microfiber texture.

• When cleaning the microfiber cloth, do not use

any fabric softener, since this adversely affects

the protective and humidity-absorption qualities

of the microfiber texture.

• To ensure the fibers are not damaged by high

temperatures, the microfiber cloth should not be

dried in a tumble drier.

HOW TO USE

Handling textiles

• Before treating textiles, upholstery or carpets

with the device, you should always conduct a

test to check the tolerance of the material to the

heating and steam treatment.

• To do so, carefully apply steam to an

inconspicuous area of the material to be treated

and subsequently allow this to dry. Then check

whether the colour or shape of the material

have been affected by the treatment.

27/2/07 9:28:48 AM