ALcom Premium AT6206 Podręcznik użytkownika - Strona 7

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Telefon ALcom Premium AT6206. ALcom Premium AT6206 9 stron. Retro

5. Press DEL key to quit.

Note: If the local area code is only 4 digits, the last digit can be left as "-".

After local area code is set, unit will auto-filter the area code if the incoming call number with the first

several digits as same as the local area code. This function is not applicable for use in Singapore.

SETTING AND USING PABX CODE FUNCTION(Only when connected to a PABX line)

1. In on-hook state, press SET key and then press ▲ key twice, LCD will display SET 3

PCODE.

2. Press SET key to confirm, LCD displays PCODE --, the first "-"flash and indicate to set the

first digit of PABX code.

3. Press ▲ or ▼ key to set the PABX code. Press SET key to confirm and enter the second digit

setting.

4. Following same steps to set the second digit.

5. To use this function, when you want to call back an incoming number, just choose the desired

number from the list and press RD key, and the unit will dial out the number with the PABX

code. Similarly when you key a pre-dial number, just press RD key and the unit will dial the

number with the PABX code with or without pause depending on your setting as seen in

below note.

Note: If your PABX code is only one digit and if you need a pause, then enter code in the first digit and

leave second digit as"-". If you don't need a pause then leave the first digit as "-" and enter the

code in the second digit.

SETTING DIALING TYPE

1. In on-hook state, press SET key and then press ▲ key fourth, LCD will display SET 5 P-T.

2. Press SET key to confirm, LCD displays TONE, press ▲ or ▼ key to select T (TONE) or P

(PULSE).

SETTING ANTI-STEAL DIALING FUNCTION

1. In on-hook state, press SET key and then press ▲ key fifth, LCD displays SET 6 ALAR

2. Press SET key to confirm, LCD displays ALAR OFF, press ▲ or ▼ key to select ON or OFF.

3. Press SET key to confirm.

When the anti-steal dialing is set to ON, users who want to dial using an extension via the same

line will hear a "DI-DI, DI-DI" beep continuously and will not be allowed to make a call.

SETTING LCD CONTRAST FUNCTION

1. In on-hook state, press SET key and then press ▲ key seventh, LCD displays SET 7 LCD

2. Press SET to enter, LCD displays LCD 3, press ▲ or ▼ to select among 1~5 levels.

3. Press SET key to confirm and exit.

- 6 -