Clarion XR2420 Instrukcja obsługi - Strona 13

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wzmacniacz Clarion XR2420. Clarion XR2420 18 stron. Xr series amplifiers
Również dla Clarion XR2420: Instrukcja obsługi i instrukcja instalacji (10 strony)

Drukuj stronę

1. Power and Speaker Connections

Two-channel high power system

In this application, the XR2220 is used to drive a pair of subwoofers.

Subwoofer

Setting the gain

After completing the installation, follow these steps to set the gain control and perform the

final system checks.

1. Turn the gain control all the way counterclockwise.

2. Turn the vehicle's ignition switch on.

3. Turn the source unit on.

4. Set all tone or equalization controls to flat positions and turn loudness off.

5. Play music content and set the volume control to 75% of full level.

Note:

If the system uses an equalizer, set all frequency controls to the flat position.

6. Slowly increase the gain control. Stop when you hear a slight audio distortion.

XR2220/XR2420/XR2120