AlcoSafe KX6000S Instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt testowy AlcoSafe KX6000S. AlcoSafe KX6000S 13 stron.

Ready: Wait until 'RDY' (Ready) appears with a

Step 4

single "beep" indicates the unit is ready to use.

Step 5

Blowing: BLOW STEADILY into the mouthpiece

for 5 seconds. "BLOW 1-5... " appears on display

indicating sample being analyzed. Blow until

"beep" sound to signal completion of the test-

ing. A BAC reading will be displayed in LCD

and alert light in LED.

Read the results: The reading would be in range from 0.0 to 4.0

‰BAC (i.e: 0.00 to 0.40%BAC or 0.00 to 2.00 mg/l) depending on

Step 6

the user pre-set BAC display format.

Note: Refer to 'Set BAC display format' for more about how to change the display format

for the BAC result

Note: It is recommended to WAIT AT LEAST 1 MINUTE between tests for more accurate result

Recall the last test record

User could recall the last test record as below:

On Welcome screen, press Right button to show the cumulative

test count (the number of tests the unit performed).

Press Right button to show the last test record.

Press Right button again to return to Welcome screen.

Note: KX6000S stores a maximum of 64 test records. Refer to 'Display test result records'

for guidance for retrieving previous test records