AlcoSense Lite Instrukcja obsługi - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt testowy AlcoSense Lite. AlcoSense Lite 9 stron.
Drukuj stronęMaintaining your AlcoSense Lite Breathalyser
Re-Calibration
Like any breathalyser, your AlcoSense will require recalibration after a period
of use. We recommend your AlcoSense breathalyser should be re-calibrated
once a year, or more frequently if you use it heavily. If you do not have
your breathalyser recalibrated on time it may read inaccurately.
Recalibration requires speciliast laboratory equipment can only be
performed by an AlcoSense approved service centre. At the time of
printing, recalibration costs £19.99 and takes 5 working days to complete.
To arrange calibration please visit www.alcosense.co.uk/cal or call us on
0800 195 0088.
Keep it Clean
To keep your AlcoSense Lite in tip top condition we recommend cleaning it
regularly using a soft cloth and storing it in a clean, cool dry place not close
to a heat source. We also recommend that you regularly perform an ASC
(Auto Sensor Clean as explained on page 6).
Clean the Sensor
To help maintain the accuracy of the device we recommend you should
perform an ASC regularly to remove any contaminants from the sensor. If
you have not used your breathalyser for several weeks re-activate the sensor
before use. You can find instructions for doing this on page 6.
Be Careful
Take care not to drop the AlcoSense Lite breathalyser as sudden knocks can
affect the unit's accuracy. If you have dropped your AlcoSense Lite and feel
that it is not reading correctly please call us to arrange to have the unit
serviced. When the product is unused, please store it in a cool and dry
environment.
12
Technical Support
If you have any queries which are not covered in this manual or need
assistance using your unit please check the troubleshooting section in this
manual, visit www.alcosense.co.uk/support or call our technical support
number 0800 195 0088 Monday to Friday 9am to 5.00pm. If calling please
make sure you have your breathalyser to hand.
Troubleshooting
The reading I got was lower than I expected.
If the breathalyser is new or it has not been used for an extended period
you will need to activate the sensor, see page 6 of this manual. If you
have activated the sensor perform an Auto Sensor Clean, see page 7 of
this manual. If this does not fix the issue please call us on 0800 1950088.
I have got a positive reading but I haven't drunk any alcohol.
This can be caused by testing within 10 minutes of eating some strong
foods, using dental products, chewing gum or smoking. On some occasions
it can also be caused by the body releasing acetone/keytones released
during the metabolism of acetoacetic acid. This can be increased with the
use of some prescribed medications or certain medical conditions, most
commonly diabetes. A healthy body can also create these substances
occasionally, it is more likely if you are on a low carbohydrate diet such as
the Atkins diet or similar. If you experience this problem please call us.
I'm doing a breath test and it says ERR.
This can be because you are not pressing and holding the blow key while
blowing. If you are pressing and holding the blow key while blowing you
coudl be stopping blowing too soon. Keep blowing and holding the key
until the unit beeps again. If this does not work please call us for
assistance.
Continued on following page....
13