ErgoCentric upCentric Power & Data Rail Podręcznik - Strona 15

Przeglądaj online lub pobierz pdf Podręcznik dla Stojaki i stojaki ErgoCentric upCentric Power & Data Rail. ErgoCentric upCentric Power & Data Rail 19 stron.

Drukuj stronę

Installation Guide

upCentric Power & Data Rail

b . Ceiling Power Infeed:

i . Position the ceiling pole on top of the CPI leg, inserting the four posts into

the corresponding holes at the bottom .

ii. Secure the pole to the ceiling using the Ceiling bracket (T). Attach ceiling

bracket to T-frame

power pole in place .

Note: Keep the Velcro strap slightly loose to allow for lifting .

iii . Route the power cable into the top of the pole and run it through to the end,

where it enters the First Rail and connects to the power block .

Note: It may be necessary to lift the ceiling pole off the leg to access the wire

and properly run it into the system .

upCentric Power & Data Rail | Installation Guide

ceiling directly above power leg . Use velcro strap to hold

Ceiling

STEP 7.E

iii

STEP 7.E